Tercel Sedan 2-Door L4-1497cc 1.5L DOHC (5E-FE) (1995)
/Page-578002.png)
1. DISCONNECT CRANKSHAFT POSITION SENSOR CONNECTOR AND CLAMP.
2. REMOVE RH ENGINE UNDER COVER.
3. REMOVE NO.2 TIMING BELT COVER.
4. REMOVE CRANKSHAFT POSITION SENSOR.
-
Remove the bolt and disconnect the crankshaft position sensor.
Torque: 8 Nm (80 kgf.cm, 69 in.lb)
-
Installation is in the reverse order of removal.
