Tercel Sedan 2-Door L4-1497cc 1.5L DOHC (5E-FE) (1995)
Circuit Opening Relay: Testing and Inspection
CIRCUIT OPENING RELAY INSPECTION
Circuit Opening Relay Location
1. REMOVE CIRCUIT OPENING RELAY.
2. INSPECT CIRCUIT OPENING RELAY.
(A) Inspect relay continuity.
-
Using an ohmmeter, check that there is continuity between terminals 86 and 85.
-
Check that there is no continuity between terminals 87 and 30.
-
If continuity is not as specified, replace the relay.
(B) Inspect relay operation.
-
Apply battery voltage across terminals 86 and 85.