Tercel Sedan 2-Door L4-1497cc 1.5L DOHC (5E-FE) (1995)
/Page-884001.png)
Knock Sensor: Component Tests and General Diagnostics
KNOCK SENSOR INSPECTION
Knock Sensor Location
1. REMOVE KNOCK SENSOR.
-
Disconnect the knock sensor connector.
-
Using SST or equivalent, remove the knock sensor. (SST 09816-30010)
2. INSPECT KNOCK SENSOR.
-
Using an ohmmeter, check that there is no continuity between the terminal and body.
-
If there is continuity, replace the sensor.
3. REINSTALL KNOCK SENSOR.
-
Installation is in the reverse order of removal.
Sensor Torque: 45 Nm (33 ft.lb)
