Tercel Sedan 4-Door L4-1456cc 1.5L SOHC (3E) (1994)
/Page-140002.png)
(a) Align the camshaft knock pin with the No.1 camshaft bearing cap mark.
(b) Align the knock pin hole on the 3E mark side with the camshaft knock pin hole and install the camshaft pulley to the camshaft.
(c) Hold the camshaft with a wrench and torque the pulley set bolt.
Torque: 50 N.m (510 kgf.cm, 37 ft.lbf)
HINT: Remove any oil or water on the camshaft timing pulley and keep it clean.
3. Install crankshaft timing pulley.
Install the crankshaft timing pulley and align the TDC marks on the oil pump body and crankshaft timing pulley.
HINT: Remove any oil or water on the crankshaft timing pulley and keep it clean.
