Tercel Sedan 4-Door L4-1456cc 1.5L SOHC (3E) (1994)
/Page-924001.png)
Impact Sensor: Service Precautions
1.
Never reuse the front airbag sensors involved in a collision when the airbag has deployed. Replace both front airbag sensors.
2.
Install the front airbag sensor with the arrow on the sensor facing toward the front of the vehicle.
3.
The front airbag sensor set bolts have been anti-rust treated. When the sensor is removed, always replace the set bolts with new ones.
4.
The front airbag sensor is equipped with an electrical connection check mechanism. Ensure to lock this mechanism securely when connecting the
connector. If the connector is not securely locked, a malfunction code will be detected by the diagnosis system.
