Tercel Sedan 4-Door L4-1456cc 1.5L SOHC (3E-E) (1992)
/Page-232001.png)
Timing Belt: Service and Repair
Timing Belt Removal
TIMING BELT REMOVAL
1. Disconnect negative terminal cable from battery.
CAUTION (w/ SRS):
Wait 90 seconds from the time the ignition switch is turned to the LOCK position and the negative (-) terminal cable is disconnected from the
battery before starting repairs.
2. Remove RH engine under cover.
3. Disconnect accelerator cable.
4. A/T: Disconnect throttle cable.
5. Disconnect PCV hoses.
6. If equipped with A/C and/or P/S, remove pipe clamp bolts.
7. If equipped with A/C and/or P/S, remove drive belt.
8. Remove alternator drive belt.
9. Remove bolt, ground strap and vacuum transmitting valves with bracket from RH engine mounting insulator.
10. Remove RH engine mounting insulator.
