toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Spark Plug > < Distributor, Ignition|Specifications|Page 692
Page 3
background image

Distributor Installation

4.

Install the distributor and lightly tighten hold down bolts.

5.

Connect the spark plug wires to the proper spark plugs.

Firing Order:

1 - 3 - 4 - 2

6.

Reconnect primary distributor connectors and reconnect negative battery terminal.

7.

To adjust ignition timing refer to ADJUSTMENT PROCEDURES.

8.

Torque distributor hold down bolts.

Torque Value:

13 ft.lbs (17 Nm)

Spark Plug > < Distributor, Ignition|Specifications|Page 692