Tercel Sedan 4-Door L4-1456cc 1.5L SOHC (3E-E) (1992)
/Page-128001.png)
Ignition Cable: Testing and Inspection
- Disconnect the high-tension cords at rubber boot. Do not pull on the cords.
NOTICE: Pulling on or bending the cords may damage the conductor inside.
- Remove distributor cap.
- Measure resistance between spark plug connector and distributor terminal.
Maximum resistance: 25 k ohms
- If resistance is high, check distributor terminals.
- If necessary replace cap and/or wire.
