Tercel Sedan 4-Door L4-1456cc 1.5L SOHC (3E-E) (1992)
/Page-80001.png)
Manifold Pressure/Vacuum Sensor: Testing and Inspection
Vacuum Sensor Circuit Diagram
Vacuum Sensor Inspection
Inspect Power Source Voltage Of Vacuum Sensor
- Disconnect the vacuum sensor connector. Turn the ignition switch ON.
- Using a voltmeter; measure the voltage between terminals VCC and E2 of the vacuum sensor connector.
Voltage: 4-6 V
- Reconnect the vacuum sensor connector.
Vacuum Sensor Inspection
Inspect Power Output Of Vacuum Sensor
