toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Sensors and Switches - Restraint Systems > < Engine RPM Sensor (NE signal) <--> [Crankshaft Position Sensor]|Description and Operation|Page 249
Page 1
background image

Ignition Switch: Service and Repair

1.

Disconnect battery ground cable.

2.

Remove steering wheel, then upper and lower covers.

3.

Disconnect electrical connectors from ignition switch.

4.

Turn ignition key to ACC position and remove ignition key cylinder.

5.

Remove screw and ignition switch.

6.

Reverse procedure to install.

Sensors and Switches - Restraint Systems > < Engine RPM Sensor (NE signal) <--> [Crankshaft Position Sensor]|Description and Operation|Page 249