toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Valve Body, A/T|Removal and Installation|Page 1576 > < Valve Body, A/T|Removal and Installation|Page 1574
Page 12
background image

5. INSTALL LOWER VALVE BODY COVER

a. Install the lower valve body cover over the new gasket.
b. Install and finger tighten the fourteen bolts.

HINT:  Each bolt length (mm, in.) is indicated in the figure.

6. INSTALL AND FINGER TIGHTEN BOLTS IN UPPER VALVE BODY

Install and finger tighten the three bolts.

HINT:  Each bolt length (mm, in.) is indicated in the figure.

7. INSTALL UPPER VALVE BODY COVER

a. Make sure that the retainers are installed correctly.

b. Install the sleeve stopper.

Valve Body, A/T|Removal and Installation|Page 1576 > < Valve Body, A/T|Removal and Installation|Page 1574