Tercel Sedan 4-Door L4-1456cc 1.5L SOHC (3E-E) (1992)
/Page-636002.png)
3. INSTALL SNAP RING
a. Select a snap ring that will allow minimum axial play.
b. Using a screwdriver and hammer, tap in the snap ring.
4. INSPECT THIRD GEAR THRUST CLEARANCE
Using a feeler gauge, measure the 3rd gear thrust clearance.
Standard clearance: 0.10 - 0.35 mm (0.0039 - 0.0138 in.)
5. INSTALL SYNCHRONIZER RING, NEEDLE ROLLER BEARINGS, SPACER, FOURTH GEAR AND REAR BALL BEARING
a. Apply gear oil to the needle roller bearings.
b. Place the synchronizer ring on the gear and align the ring slots with the shifting keys.
