Tundra 2WD V6-3.4L (5VZ-FE) (2004)
/Page-915001.png)
Brake Master Cylinder: Service and Repair
Double Cab
BRAKE MASTER CYLINDER (Double Cab)
REMOVAL
1. DISCONNECT LEVEL WARNING SWITCH CONNECTOR
NOTICE:
^
Do not adjust the brake booster push rod.
^
Do not change the combination of the diameter converting unit and brake.
2. TAKE OUT FLUID WITH SYRINGE
NOTICE: Do not let brake fluid remain on a painted surface. Wash it off immediately.
3. DISCONNECT BRAKE LINES
Using SST, disconnect the 5 brake lines from the master cylinder and 3-way.
SST 09023-00100
Torque: 15 Nm (155 kgf-cm, 11 ft. lbs.)
