Tundra 2WD V6-3.4L (5VZ-FE) (2004)
Double Cab
7. DISCONNECT LIQUID TUBE AND DISCHARGE HOSE
Remove the 2 bolts and disconnect the both tube and hose.
Torque: 10 N.m (100 kgf.cm, 7 ft.lbf)
NOTE: Cap open the fittings immediately to keep moisture or dirt out of the system.
HINT: At the time of installation, please refer to the following item.
Lubricate 2 new O-rings with compressor oil and install them to the tubes.
Double Cab
8. REMOVE CONDENSER
a. Remove the 2 bolts and 2 lower brackets.
b. Remove the 4 bolts and 2 upper brackets.