Tundra 2WD V6-3.4L (5VZ-FE) (2004)
/Page-1523001.png)
Brake Lamp: Component Tests and General Diagnostics
INSPECTION
1. Double cab: INSPECT STOP LIGHT SWITCH CONTINUITY
If continuity is not as specified, replace the switch.
2. Except Double Cab: INSPECT STOP LIGHT SWITCH CONTINUITY
If continuity is not as specified, replace the switch.
3. INSPECT HI-MOUNTED STOP LIGHT ASSEMBLY CONTINUITY
Using the ohmmeter, check that continuity exists between terminal 1 and terminal 2.
If continuity is not as specified, replace the light assembly or bulb.
