Tundra 2WD V6-3.4L (5VZ-FE) (2004)
/Page-1303001.png)
Impact Sensor: Service and Repair
Replacement Requirements
REPLACEMENT
In the following cases, replace the front airbag sensor.
-
If the SRS has been deployed in a collision (Replace both the left and right airbag sensors.).
-
If the front airbag sensor has been found to be faulty in troubleshooting.
-
If the front airbag sensor has been found to be faulty during checking items.
-
If the front airbag sensor has been dropped.
CAUTION: Be sure to follow the correct procedure for removal and installation of the front airbag sensor.
