toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Collision / Non-Collision Inspections|Page 923 > < Impact Sensor|Specifications|Page 920
Page 1
background image

Impact Sensor: Testing and Inspection
Collision / Non-Collision Inspections

INSPECTION

VEHICLES NOT INVOLVED IN COLLISION

Do a diagnostic system check.*

VEHICLES INVOLVED IN COLLISION

a. Do a diagnostic system check.*

b. If the front fender of the car or its periphery is damaged, do a visual check for damage to the front airbag sensor, which includes the following

items even if the airbag was not deployed:
-

Bracket deformation

-

Paint peeling off the bracket

-

Cracks, dents or chips in the case

-

Cracks, dents, chipping and scratches in the connector

-

Peeling off of the label or damage to the serial number

* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes.

See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/SRS Warning Light Check
See: Restraint Systems/Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/Displaying & Reading Trouble Codes

Collision / Non-Collision Inspections|Page 923 > < Impact Sensor|Specifications|Page 920