Tundra 2WD V6-3.4L (5VZ-FE) (2004)
L.
Fasten the engine No. 2 wire harness at positions (A) and (B) as shown in the illustration using the 2 wire ties.
NOTE:
Place the engine No. 2 wire harness directly on top of the engine wire as shown.
NOTE:
The engine No. 2 wire harness (P/N 82122-0C120) includes 4 wire ties (P/N 90464-00551). Use two of them and keep the other wire ties as
spares.
HINT:
Align the lower edge of the clamp with the upper edge of the white tape, and fasten the wires with the wire tie within 5 mm (0.2 in.) from the
aligned position.