Tundra 2WD V6-3.4L (5VZ-FE) (2004)
Back Window Glass: Service and Repair
REMOVAL
HINT: A bolt without a torque specification is shown in the standard bolt chart.
1. Access cab (Standard body type):
Access cab (Wide body type):
REMOVE REAR SEAT
2. Double cab:
FOLD REAR SEAT
a. Lower the headrest to the lowest position. Pull the seat-back angle adjusting lever and fold the seatback down.
b. Unlock the seat legs by pulling up one of the lever on the seat legs and turn up the whole seat forward.
3. Standard cab:
REMOVE FRONT DOOR SCUFF PLATES
4. Access cab (Standard body type):
Access cab (Wide body type):
REMOVE ACCESS DOOR SCUFF PLATES
5. Double cab:
REMOVE BACK PANEL TRIM
6. REMOVE ASSIST GRIPS
7. Standard cab:
REMOVE FRONT PILLAR GARNISHES
8. Access cab (Standard body type):
Access cab (Wide body type):
REMOVE ROOF SIDE RAIL GARNISHES
9. REMOVE ROOM LIGHT
10. Standard cab:
REMOVE COAT HOOK
11. Standard cab:
REMOVE BACK PANEL UPPER GARNISH
12. Access cab (Standard body type):
Access cab (Wide body type):
REMOVE QUARTER TRIMS
13. Double cab:
REMOVE QUARTER TRIMS LOWER
14. Double cab:
REMOVE QUARTER TRIMS UPPER
15. Standard cab:
Access cab (Standard body type):
Access cab (Wide body type):