Tundra 2WD V6-3.4L (5VZ-FE) (2004)
b. Remove the 2 screws.
c. Using a screwdriver, rotate the clip by 90 degrees and remove it.
HINT: Tape the screwdriver tip before use.
d. Remove the front personal light, then disconnect the connector.
7. w/ Sliding roof:
REMOVE ROOF CONSOLE BOX
a. Remove the 2 screws.
b. Using a screwdriver, remove the roof console box.
HINT: Tape the screwdriver tip before use.
c. Disconnect the connectors.
8. w/o Sliding roof:
REMOVE ROOF CONSOLE BOX
a. Remove the 4 screws.
b. Using a screwdriver, remove the roof console box.
HINT: Tape the screwdriver tip before use.
c. Disconnect the connectors.
9. REMOVE SUN VISOR HOLDERS
Remove the 2 screws and 2 sun visor holders.