Tundra 2WD V6-4.0L (1GR-FE) (2005)
b. Using the pulley set bolt and SST, remove the crankshaft pulley.
SST 09950-50013 (09951-05010, 09952-05010, 09953-05020, 09954-05031)
20. REMOVE OIL PAN NO.2
a. Remove the 15 bolts and 2 nuts.
b. Insert the blade of SST between the oil pan and oil pan No.2, cut off applied sealer and remove the oil pan No.2.
SST 09032-00100
NOTICE:
-
Be careful not to damage the contact surface of the oil pan and oil pan No.2.
-
Be careful not to damage the oil pan No.2 flange.
21. REMOVE OIL STRAINER
Remove the 2 nuts, oil strainer and gasket.