Tundra 2WD V6-4.0L (1GR-FE) (2005)
/Page-733002.png)
7. REMOVE FUEL TANK ASSEMBLY
a. Set up a transmission jack under the fuel tank.
b. Remove the 2 nuts and disconnect the fuel pipe bracket from the body.
c. Remove the 2 bolts and disconnect the 2 fuel tank bands from the fuel tank.
d. Operate the transmission jack and remove the fuel tank.
8. REMOVE FUEL PUMP ASSEMBLY
INSTALLATION
1. INSTALL FUEL PUMP ASSEMBLY
2. INSTALL FUEL TANK ASSEMBLY
a. Set up the fuel tank on the transmission jack.
b. Operate the transmission jack and install the fuel tank.
c. Install the 2 fuel tank bands with the 2 bolts.
Torque: 62 Nm (632 kgf.cm, 45 ft.lbf)
