Tundra 2WD V8-4.6L (1UR-FE) (2010)
/Page-2439003.png)
Removal
PARK ASSIST / MONITORING: ULTRASONIC SENSOR (for Front Side): REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT END PANEL LH (for Resin Type Bumper) See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Front Bumper (for Resin Type Bumper)/Removal
3. REMOVE FRONT END PANEL RH (for Resin Type Bumper) See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Front Bumper (for Resin Type Bumper)/Removal
4. REMOVE FRONT BUMPER COVER (for Resin Type Bumper) See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Front Bumper (for Resin Type Bumper)/Removal
5. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH (for Steel Type Bumper) See: Body and Frame/Bumper/Front
Bumper/Service and Repair/Removal and Replacement/Front Bumper (for Steel Type Bumper)/Removal
6. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH (for Steel Type Bumper) See: Body and Frame/Bumper/Front
Bumper/Service and Repair/Removal and Replacement/Front Bumper (for Steel Type Bumper)/Removal
7. REMOVE FRONT END PANEL LH (for Steel Type Bumper) See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Front Bumper (for Steel Type Bumper)/Removal
8. REMOVE FRONT END PANEL RH (for Steel Type Bumper) See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Front Bumper (for Steel Type Bumper)/Removal
9. REMOVE FRONT LOWER BUMPER COVER (for Steel Type Bumper) See: Body and Frame/Bumper/Front Bumper/Service and
Repair/Removal and Replacement/Front Bumper (for Steel Type Bumper)/Removal
10. REMOVE FRONT BUMPER BAR (for Steel Type Bumper) See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Front Bumper (for Steel Type Bumper)/Removal
11. REMOVE NO. 1 ULTRASONIC SENSOR
(a) While pushing down on the lever with a finger to release the one claw, detach the claw on the other side to remove the ultrasonic sensor.
