Tundra 2WD V8-4.6L (1UR-FE) (2010)
Seat Memory Switch: Service and Repair
Removal
SEAT: SEAT MEMORY SWITCH (w/ Seat Position Memory System): REMOVAL
1. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Front Door (for Double Cab)/Disassembly
2. REMOVE FRONT ARMREST UPPER BASE PANEL LH See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Front Door (for Double Cab)/Disassembly
3. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH See: Body and Frame/Doors, Hood and Trunk/Doors/Front
Door/Service and Repair/Front Door (for Double Cab)/Disassembly
4. REMOVE COURTESY LIGHT ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Front Door
(for Double Cab)/Disassembly
5. REMOVE FRONT DOOR ARMREST COVER LH
6. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Front Door (for Double Cab)/Disassembly
7. REMOVE SEAT MEMORY SWITCH
(a) Remove the 2 screws and seat memory switch.