Tundra 2WD V8-4.6L (1UR-FE) (2010)
4. REMOVE FRONT UPPER ARMREST BASE PANEL LH See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Front Door (for Double Cab)/Disassembly
5. REMOVE FRONT DOOR ARMREST COVER LH
6. REMOVE COURTESY LIGHT ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Front Door
(for Double Cab)/Disassembly
7. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Front Door (for Double Cab)/Disassembly
8. REMOVE FRONT NO. 1 SPEAKER ASSEMBLY
(a) Disconnect the speaker connector.
(b) Remove the 4 screws and speaker.
NOTICE:
Do not touch the cone part of the speaker.
9. REMOVE FRONT NO. 3 SPEAKER ASSEMBLY (for 10 Speakers)
(a) Remove the 3 screws and speaker with bracket.
(b) Detach the 3 claws and remove the speaker from the bracket.
NOTICE:
Do not touch the cone part of the speaker.
Installation
AUDIO / VISUAL: FRONT DOOR SPEAKER (for Double Cab): INSTALLATION
HINT
*
Use the same procedures for the LH side and RH side.