Tundra 2WD V8-4.6L (1UR-FE) (2010)
/Page-2615001.png)
Rear Fender Liner: Service and Repair
Removal
EXTERIOR: FENDER LINER (for Rear Side): REMOVAL
HINT
*
Use the same procedures for the RH side and LH side.
*
The procedures listed below are for the LH side.
1. REMOVE REAR WHEEL HOUSE LINER LH
(a) Remove the rear wheel house liner (center).
(1) Remove the 6 screws.
(2) Remove the 9 clips and rear wheel house liner.
(b) Remove the rear wheel house liner (front).
(1) Remove the 2 screws.
(2) Remove the 4 clips and rear wheel house liner.
