Tundra 2WD V8-4.6L (1UR-FE) (2010)
HINT
Use the same procedures described for the LH side.
12. INSTALL ROOM LIGHT ASSEMBLY (for Short Type Overhead Console Box)
(a) Connect the connector.
(b) Attach the 4 clips to install the room light.
(c) Attach the 4 claws to install the lens.
13. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror) See: Mirrors/Service and Repair/Inner Rear View
Mirror/Installation
14. INSTALL ROOF CONSOLE BOX ASSEMBLY
(a) for Short Type:
Install the roof console box See: Console/Service and Repair/Overhead Console Box (for Short Type)/Installation.
(b) for Long Type:
Install the roof console box See: Console/Service and Repair/Overhead Console Box (for Long Type)/Installation.
15. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH
(a) Pass the rear seat outer belt floor anchor through the quarter trim panel.
(b) Attach the 4 clips to install the front quarter trim panel.
(c) Install the 2 bolts.