Tundra 2WD V8-4.6L (1UR-FE) (2010)
(a) Install a new assist grip plug.
4. INSTALL ASSIST GRIP SUB-ASSEMBLY
(a) Install the 2 clips and 2 covers to the assist grip, as shown in the illustration.
(b) Install the assist grip.
5. INSTALL VISOR HOLDER
(a) Install the visor holder with the screw.
HINT
Use the same procedure to install the visor holder on the other side.
6. INSTALL VISOR ASSEMBLY LH
(a) Install the visor with the 3 screws.
7. INSTALL VISOR ASSEMBLY RH
HINT