Tundra 2WD V8-4.6L (1UR-FE) (2010)
2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB LH See: Service and Repair/Overhaul/Front Seat Assembly (for Power
Seat)/Disassembly
3. REMOVE RECLINING POWER SEAT SWITCH KNOB LH See: Service and Repair/Overhaul/Front Seat Assembly (for Power
Seat)/Disassembly
4. REMOVE FRONT SEAT CUSHION SHIELD LH See: Service and Repair/Overhaul/Front Seat Assembly (for Power Seat)/Disassembly
5. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Removal and
Replacement/Front Seat Inner Belt Assembly/Removal
6. REMOVE INNER FRONT SEAT CUSHION SHIELD LH See: Service and Repair/Overhaul/Front Seat Assembly (for Power
Seat)/Disassembly
7. REMOVE FRONT POWER SEAT SWITCH LH See: Service and Repair/Overhaul/Front Seat Assembly (for Power Seat)/Disassembly
8. REMOVE FRONT SEAT CUSHION COVER WITH PAD LH See: Service and Repair/Overhaul/Front Seat Assembly (for Power
Seat)/Disassembly
9. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER LH See: Service and Repair/Overhaul/Front Seat Assembly (for Power
Seat)/Disassembly
10. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY LH
(a) w/ Seat Heater System:
Cut off the tack pins which fasten the seat heater to the seat cushion cover, and then remove the seat cushion heater from the seat cushion
cover.
(b) w/ Climate Control Seat System:
Cut off the tack pins which fasten the seat heater to the seat cushion cover, and then remove the seat cushion heater from the seat cushion
cover.
Installation
SEAT: FRONT SEAT CUSHION HEATER (w/ Seat Heater System or Climate Control Seat System): INSTALLATION
CAUTION:
Wear protective gloves. Sharp areas on the seat frame and adjuster may injure your hands.
HINT
*
Use the same procedures for the LH side and RH side.
*
The procedures listed below are for the LH side.
1. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY LH
(a) w/ Seat Heater System: