Tundra 2WD V8-4.6L (1UR-FE) (2010)
/Page-2780003.png)
(2) If the result is not as specified, replace the outer mirror switch.
3. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/ Memory)
(a) Inspect the outer mirror switch.
(1) Select "L" on the left/right adjustment switch.
(2) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(3) If the result is not as specified, replace the outer mirror switch.
(4) Select "R" on the left/right adjustment switch.
(5) Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
Standard resistance:
