Tundra 2WD V8-4.6L (1UR-FE) (2010)
18. REMOVE TAIL GATE MALE HINGE SUB-ASSEMBLY RH
(a) Using a T40 "TORX" socket, remove the 2 screws and tail gate male hinge from the tail gate.
Installation
ENGINE HOOD / DOOR: TAIL GATE: INSTALLATION
1. INSTALL TAIL GATE MALE HINGE SUB-ASSEMBLY LH
(a) Using a T40 "TORX" wrench, install the tail gate lock male hinge sub-assembly with the 2 screws.
Torque : 29 Nm (296 kgf-cm, 21 ft-lbf)
2. INSTALL TAIL GATE MALE HINGE SUB-ASSEMBLY RH
(a) Using a T40 "TORX" wrench, install the tail gate lock male hinge sub-assembly with the 2 screws.
Torque : 29 Nm (296 kgf-cm, 21 ft-lbf)
3. INSTALL TAIL GATE HINGE ASSEMBLY LH
(a) Using a T40 "TORX" wrench, install the tail gate hinges to the tail gate with the 2 screws.
Torque : 18 Nm (184 kgf-cm, 13 ft-lbf)
(b) Install the bolt to the tail gate.
Torque : 18 Nm (184 kgf-cm, 13 ft-lbf)
4. INSTALL TAIL GATE HINGE ASSEMBLY RH
(a) Using a T40 "TORX" wrench, install the tail gate hinges to the tail gate with the 2 screws.