Tundra 2WD V8-4.6L (1UR-FE) (2010)
17. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY (for 4180 mm [13 ft. 8.6 in.] Wheelbase Type)
(a) Remove the adjustment nut and lock nut (labeled A).
(b) Remove the bolt (labeled B) and cable retainer.
(c) Remove the 3 nuts (labeled C) and 3 clamps from the body.
(d) Disconnect the 3 clamps (labeled D) from the No. 1 parking brake cable.
(e) Remove the 2 bolts (labeled E) and No. 1 parking brake cable from the inside of the vehicle.
NOTICE:
Do not bend and twist the parking brake cable.
(f) Remove the 3 bolts (labeled F) and No. 1 cable support bracket.
18. REMOVE REAR WHEEL LH
19. DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH See: Service and Repair/Disassembly
20. REMOVE REAR DISC LH See: Disc Brake System/Service and Repair/Removal and Replacement/Rear Brake/Removal
21. REMOVE PARKING BRAKE SHOE RETURN SPRING LH See: Service and Repair/Disassembly
22. REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY LH See: Service and Repair/Disassembly
23. REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY LH See: Service and Repair/Disassembly
24. REMOVE PARKING BRAKE SHOE LEVER LH See: Service and Repair/Disassembly
25. REMOVE INTERMEDIATE LEVER TENSION SPRING
(a) Remove the tension spring.