Tundra 2WD V8-4.6L (1UR-FE) (2010)
/Page-906003.png)
8. CONNECT COOLER COMPRESSOR ASSEMBLY (w/ Oil Cooler) See: Heating and Air Conditioning/Compressor HVAC/Service and
Repair/Removal and Replacement/Installation
9. INSTALL FRONT FENDER APRON SEAL LH See: Exhaust System/Exhaust Manifold/Service and Repair/Installation
10. INSTALL WATER INLET SUB-ASSEMBLY WITH THERMOSTAT
(a) Install the water inlet with thermostat See: Thermostat/Service and Repair/Installation.
11. INSTALL FAN SHROUD
(a) Install the fan shroud See: Radiator Cooling Fan/Service and Repair/Installation.
