Tundra 2WD V8-4.6L (1UR-FE) (2010)
Cylinder Head Gasket: Service and Repair
Cylinder Head Gasket (for Bank 2)
Components
1UR-FE ENGINE MECHANICAL: CYLINDER HEAD GASKET (for Bank 2): COMPONENTS
Removal
1UR-FE ENGINE MECHANICAL: CYLINDER HEAD GASKET (for Bank 2): REMOVAL
1. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH
(a) Remove the exhaust manifold RH See: Exhaust System/Exhaust Manifold/Service and Repair/Removal.
2. REMOVE CAMSHAFTS (for Bank 2)
(a) Remove the camshafts See: Camshaft, Lifters and Push Rods/Camshaft/Service and Repair/Camshaft (for Bank 2)/Removal.
3. REMOVE NO. 1 VALVE ROCKER ARM SUB-ASSEMBLY
(a) Remove the 16 valve rocker arms from the cylinder head.
HINT
Arrange the removed parts in the correct order.
4. REMOVE VALVE LASH ADJUSTER ASSEMBLY
(a) Remove the 16 valve lash adjusters from the cylinder head.
HINT
Arrange the removed parts in the correct order.
5. REMOVE VALVE STEM CAP
(a) Remove the 16 valve stem caps from the cylinder head.
HINT
Arrange the removed parts in the correct order.
6. REMOVE CYLINDER HEAD SUB-ASSEMBLY RH
(a) Uniformly loosen and remove the 2 bolts in the sequence shown in the illustration.