Tundra 2WD V8-4.6L (1UR-FE) (2010)
HINT
The direction of hose clamp is indicated in the illustration.
5. CONNECT NO. 8 WATER BY-PASS HOSE
(a) Connect the water by-pass hose.
HINT
The direction of hose clamp is indicated in the illustration.
6. INSTALL NO. 1 WATER BY-PASS HOSE
(a) Install the water by-pass hose.
HINT
The direction of hose clamp is indicated in the illustration.
7. INSTALL WATER BY-PASS PIPE (w/ Oil Cooler)
(a) Connect the 4 water hoses.
HINT
Connect each hose so that the direction of each hose clamp is as indicated in the illustration.
(b) Install the water by-pass hose with the 2 bolts.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)