Tundra 2WD V8-4.6L (1UR-FE) (2010)
(a) Install the 4 No. 1 converter protector stays.
(b) Install the 2 No. 1 monolithic converter protectors with the 4 bolts and 4 nuts.
Torque : 11 Nm (107 kgf-cm, 8 ft-lbf)
HINT
Install the monolithic converter protector within the angle range specified in the illustration.
3. INSTALL MONOLITHIC CONVERTER PROTECTOR (for Bank 2)
(a) Install the 2 No. 1 converter protector stays and 2 No. 2 converter protector stays.
(b) Install the 2 monolithic converter protectors with the 4 bolts and 4 nuts.
Torque : 11 Nm (107 kgf-cm, 8 ft-lbf)
HINT
Install the monolithic converter protector within the angle range specified in the illustration.
4. INSTALL NO. 1 MONOLITHIC CONVERTER PROTECTOR (for Bank 2)
(a) Install the 4 No. 1 converter protector stays.
(b) Install the 2 No. 1 monolithic converter protectors with the 4 bolts and 4 nuts.
Torque : 11 Nm (107 kgf-cm, 8 ft-lbf)
HINT
Install the monolithic converter protector within the angle range specified in the illustration.