Tundra 2WD V8-4.6L (1UR-FE) (2010)
Condenser HVAC: Service and Repair
Removal
AIR CONDITIONING: CONDENSER: REMOVAL
1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM See: Service and Repair
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
3. REMOVE FRONT BUMPER COVER
(a) for Steel Type Bumper:
Remove front bumper cover See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and Replacement/Front Bumper (for
Steel Type Bumper)/Removal.
(b) for Resin Type Bumper:
Remove front bumper cover See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and Replacement/Front Bumper (for
Resin Type Bumper)/Removal.
4. DISCONNECT OIL COOLER HOSE (w/ Air Cooled Transmission Oil Cooler)
(a) Using pliers, grip the claws of the clip and slide the clip.
(b) Disconnect the 2 oil cooler hoses.
5. REMOVE RADIATOR ASSEMBLY
(a) for 1GR-FE:
Remove the radiator See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal.
(b) for 1UR-FE:
Remove the radiator See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal.
(c) for 3UR-FE:
Remove the radiator See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal.
(d) for 3UR-FBE:
Remove the radiator See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal.
6. DISCONNECT DISCHARGE HOSE