Tundra 2WD V8-4.6L (1UR-FE) (2010)
8. INSTALL NO. 2 COOLER COVER
(a) Attach the 2 claws to install the cover.
(b) Install the 2 nuts.
Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)
9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
10. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light See: Restraint Systems/Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble
Codes/Check Mode Procedure.
11. ADD ENGINE COOLANT
(a) for 1GR-FE:
Add engine coolant See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair.
(b) for 1UR-FE:
Add engine coolant See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair.
(c) for 3UR-FE:
Add engine coolant See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair.
(d) for 3UR-FBE:
Add engine coolant See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair.
12. CHARGE REFRIGERANT See: Service and Repair
13. WARM UP ENGINE See: Service and Repair
14. CHECK FOR ENGINE COOLANT LEAK See: Service and Repair
15. CHECK FOR REFRIGERANT GAS LEAK
(a) Check for refrigerant gas leak See: Service and Repair.