Tundra 2WD V8-4.6L (1UR-FE) (2010)
/Page-2186009.png)
(a) Install the heater radiator unit.
(b) Attach the 3 claws to install the heater clamp.
(c) Install the plate with the 3 screws.
5. INSTALL COOLING UNIT DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)
(a) Install the damper servo with the 3 screws, as shown in the illustration.
(b) Connect the connector.
6. INSTALL BLOWER DAMPER SERVO SUB-ASSEMBLY
(a) Install the damper servo with the 3 screws.
(b) Connect the connector.
