Tundra 2WD V8-4.6L (1UR-FE) (2010)
(1) Insert the pin into the plate groove.
(2) Attach the claw to install the main plate.
(3) Install the 2 screws.
(c) Set the damper servo so that the cutout part engages with the tooth of the gear, and attach the claw to install the damper servo.
(d) Install the 4 screws and connect the 2 connectors.
9. INSTALL AIR DUCT
(a) Install the duct with the 2 screws.
10. INSTALL BLOWER WITH FAN MOTOR SUB-ASSEMBLY