Tundra 2WD V8-4.6L (1UR-FE) (2010)
Audible Warning Device: Service and Repair
Installation
BRAKE CONTROL: SKID CONTROL BUZZER: INSTALLATION
1. INSTALL SKID CONTROL BUZZER ASSEMBLY
(a) Connect the buzzer connector.
NOTICE:
Securely connect the connector.
(b) Attach the clamp to install the buzzer.
NOTICE:
*
Securely insert the clamp into the bracket of the instrument panel reinforcement.
*
If the buzzer is dropped, replace it.
2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH See: Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Instrument Panel Safety Pad (for Column Shift Type)/Installation
3. INSTALL INSTRUMENT SIDE PANEL LH See: Dashboard / Instrument Panel/Service and Repair/Removal and Replacement/Instrument
Panel Safety Pad (for Column Shift Type)/Installation
4. INSTALL COWL SIDE TRIM BOARD LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (For
Regular Cab)/Installation
5. INSTALL FRONT DOOR SCUFF PLATE LH (for Regular Cab) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Roof Headlining (For Regular Cab)/Installation
6. INSTALL FRONT DOOR SCUFF PLATE LH (for Double Cab, CrewMax) See: Body and Frame/Interior Moulding / Trim/Headliner/Service
and Repair/Roof Headlining (For Double Cab)/Installation
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL