Tundra 2WD V8-4.6L (1UR-FE) (2010)
/Page-2921001.png)
Tire Pressure Monitor Receiver / Transponder: Service and Repair
Removal
TIRE AND WHEEL: TIRE PRESSURE WARNING RECEIVER: REMOVAL
1. REMOVE ROOF HEADLINING ASSEMBLY
(a) for Regular Cab:
Remove the roof headlining See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (For Regular
Cab)/Removal.
(b) for Double Cab:
Remove the roof headlining See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (For Double
Cab)/Removal.
(c) for CrewMax:
Remove the roof headlining See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for
CrewMax)/Removal.
2. REMOVE TIRE PRESSURE WARNING ANTENNA AND RECEIVER
(a) Disconnect the receiver connector.
(b) Remove the bolt and receiver.
