Tundra 2WD V8-4.6L (1UR-FE) (2010)
/Page-766001.png)
Wheel Hub: Removal and Replacement
Components
AXLE: FRONT AXLE HUB: COMPONENTS
Removal
AXLE: FRONT AXLE HUB: REMOVAL
HINT
*
Use the same procedures for the LH side and RH side.
*
The procedures listed below are for the LH side.
1. REMOVE FRONT WHEEL
2. DISCONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH
(a) Remove the bolt and disconnect the brake tube bracket from the steering knuckle.
(b) Remove the 2 bolts and disconnect the disc brake caliper from the steering knuckle.
