Tundra 2WD V8-4.6L (1UR-FE) (2010)
3. REMOVE FRONT SEAT ASSEMBLY LH (for Power Seat)
(a) Remove the front seat LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat Assembly (for Power
Seat)/Removal.
4. REMOVE FRONT SEAT ASSEMBLY RH (for Power Seat)
HINT
Use the same procedures described for the LH side.
5. REMOVE CENTER FRONT SEAT ASSEMBLY
(a) Remove the center front seat See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat Assembly (for Center
Seat)/Removal.
6. REMOVE POWER OUTLET SOCKET ASSEMBLY
(a) Disconnect the power outlet socket connector.
(b) Using a screwdriver, detach the claw and remove the power outlet socket.
HINT
Tape the screwdriver tip before use.
7. REMOVE POWER OUTLET SOCKET COVER
(a) Detach the 2 claws and remove the power outlet socket cover.
8. REMOVE CENTER SEATBACK PANEL (for Double Cab) See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat Assembly (for
Center Seat)/Disassembly
9. REMOVE REAR POWER OUTLET SOCKET ASSEMBLY (for Double Cab)
(a) Using a screwdriver, detach the claw and remove the power outlet socket.