Tundra 2WD V8-4.6L (1UR-FE) (2010)
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- CHECK FOR SHORT IN CAN BUS WIRES (POWER STEERING ECU)
OK -- Continue to next step.
12. CHECK FOR SHORT IN CAN BUS WIRES (NO. 1 JUNCTION CONNECTOR - CENTER AIRBAG SENSOR)
(a) Disconnect the J83 No. 1 junction connector connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- CHECK FOR SHORT IN CAN BUS WIRES (CENTER AIRBAG SENSOR)
OK -- REPAIR OR REPLACE NO. 1 JUNCTION CONNECTOR
13. CHECK FOR SHORT IN CAN BUS WIRES (COMBINATION METER ECU)
(a) Disconnect the J28 combination meter ECU connector.