Tundra 2WD V8-4.6L (1UR-FE) (2010)
/Page-1123046.png)
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPAIR OR REPLACE CAN BRANCH WIRE CONNECTED TO MAIN BODY ECU (CANH, CANL)
OK -- REPLACE MAIN BODY ECU
15. CHECK FOR SHORT TO B+ IN CAN BUS WIRE (SKID CONTROL ECU WITH ACTUATOR)
(a) Disconnect the A17 skid control ECU with actuator connector.
