Tundra 2WD V8-4.6L (1UR-FE) (2010)
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- CHECK FOR SHORT TO GND IN CAN BUS WIRE (MAIN BODY ECU)
OK -- Continue to next step.
9. CHECK FOR SHORT TO GND IN CAN BUS WIRE (NO. 1 JUNCTION CONNECTOR - SKID CONTROL ECU WITH ACTUATOR)
(a) Disconnect the A46 No. 1 junction connector connector.
(b) Measure the resistance according to the value(s) in the table below.