Tundra 2WD V8-4.6L (1UR-FE) (2010)
6. DISCONNECT NO. 1 FUEL PIPE SUB-ASSEMBLY
(a) Disconnect the No. 1 fuel pipe from the fuel delivery pipe LH See: Service Precautions.
7. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY RH
(a) Disconnect the No. 6 wire harness connector.
(b) Remove the 2 bolts and fuel delivery pipe RH.
NOTICE:
When removing the delivery pipe, hold the pipe by both ends and pull it straight upward.
(c) Remove the 2 delivery pipe spacers and 4 insulators from the intake manifold.
8. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY LH
(a) Disconnect the No. 7 wire harness connector.
(b) Remove the 2 bolts and fuel delivery pipe LH.
NOTICE:
When removing the delivery pipe, hold the pipe by both ends and pull it straight upward.
(c) Remove the 2 delivery pipe spacers and 4 insulators from the intake manifold.
9. REMOVE FUEL INJECTOR ASSEMBLY
(a) Remove the fuel injector from the fuel delivery pipe, and then disconnect the injector connector.