Tundra 2WD V8-4.6L (1UR-FE) (2010)
Fuel Pressure Regulator: Service and Repair
Removal
1UR-FE FUEL: FUEL PRESSURE REGULATOR: REMOVAL
1. DISCHARGE FUEL SYSTEM PRESSURE See: Fuel Injector/Service and Repair/Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
3. REMOVE V-BANK COVER See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
4. REMOVE AIR CLEANER HOSE ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
5. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY
(a) Disconnect the No. 2 fuel tube from the pressure regulator See: Service Precautions.
CAUTION:
Put a cloth or equivalent under the pressure regulator.
(b) Disconnect the vacuum sensing hose from the pressure regulator.
(c) Remove the 2 bolts, and pull out the pressure regulator.
(d) Remove the O-ring from the pressure regulator.