Tundra 2WD V8-4.6L (1UR-FE) (2010)
/Page-2345002.png)
Removal
SEAT BELT: FRONT SEAT INNER BELT ASSEMBLY: REMOVAL
HINT
*
Use the same procedures for the LH side and RH side.
*
The procedures listed below are for the LH side.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag.
2. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat)
